ive been searching for a while now and i cant find anything besides vdub that might remove station watermarks.... i record in vob format and can convert to mpg from there...i would like to do my editing in mpg format not avi....... id rather not go to avi and then back to mpg....from the mpgs i then use svcd2dvd to return to vobs.....too many steps might result in too much quality loss
looter
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 30 of 32
Thread
-
-
well you have no choice --
the downside to recording in vobs (mpeg) is that to do anything much beyond cuts will require re-rendering .."Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
Load the vob into vdub and apply the delogo filter and then frameserve so you can encode to mpeg,thats your best route.
I think,therefore i am a hamster. -
holy shit.....that was fast....thanx
well is there a good way to convert vobs to avis without losing quality?...i can use canopus procoder to convert back...unless there is a way to go directly back to vobs
looter -
Frameserve with vdub!You wont need to save as avi.
I think,therefore i am a hamster. -
frame serve w/ vdub to procoder and procoder can encode directly to vobs if you want ..
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
see guides on frame serving with vdub ...
you can frame serve to procoder with v-dub , just change the file extension to avs from vdr"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
Originally Posted by BJ_M
If in doubt, Google it. -
hey guys.....thanks so far......
i been playin around for a bit now and got further than i expected but not enough to finish my project......this is where i sit.....
i figured out the logoaway plugin....enough to get me goin....and i did all my editing without a problem....i can get the frameserver running somewhat.....i open the files in canopus and tmpegenc but here is where i get stuck
as far as procoder goes i have version 1.5.....im not sure how to save directly to vob..when i save as program stream i keep getting the m2p file which i then have to rename to mpg...annoying.......if i save as a demux...i get m2v and wav files which wont multiplex in tmpg...i also got a few timeouts and shutdowns after a few hours within the program during highest quality setting
tmpgenc just gives an error when ACM was initialized when i try to start encoding
looter -
upgrade to version 2 of procoder , though you really should use another program to compress the audio to ac3 and another program to author for dvd ...
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
Originally Posted by zootedlooterIf in doubt, Google it.
-
ok guys......i went back to one of my original projects and you havent steered me wrong yet....thanx
i am continuing to use canopus procoder 1.5 i dont mind the demux because as jim said.....tmpenc dvd will remux....the problem i am now having is with canopus reencoding at 2x the file size of the original....i looked for a setting to limit the output but could not find one.....
any ideas?
looter -
it is called bitrate
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
thanx bj
that was a future question i was saving for a later date......i guess it woked itself into this thread
i decided to go with one pass vbr ovr cbr.........2 pass isnt allowed with file splitting.....so i lowered the bitrate to 1/2 of the default(now 1182) and left the max alone(2520).....i am gonna run a check with a 10 min clip but just in case the check doesnt pick up any errors that might result in a future fast moving scene......can you tell me if this sounds like it would work?
people pay alot of cash to go to school for advice like this......its much appreciated here
looter -
are you making svcd? a 1 pass at that bit rate (1/2 of 1182) may look not so good ...
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
it is a copy of an existing dvd shrunk from 4.7 to 2.0 GB..i wish to keep the file size the same and return to vob for burning.....i am not concerned with the initial deterioration of quality but i dont want to lessen the quality any further.....
-
Originally Posted by BJ_M
its a one pass at 1182.......the default was set at 2364 -
at that bit rate --- which is really low for mpeg2 anyway .. you might want to go to 1/2 D1
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
still may not look very good
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
i was being kind
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
you guys were probably right
i never even checked it......it was set for svcd by accident......i just reset it for dvd and its running at 6000/9000......probably too high....what is a good vbr setting to keep a 1 MB file at 1 MB? -
at the same bit rate it started at ...
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
that is not the real bitrate most likely .. check with bitrate viewer
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
realtime progress report
at that bitrate i wouldve wound up with another 2.1 GB file or so....i lowered the bitrates to 3000/6000....hope this works
frustration meter
min xxxxxxxxxxx------- max
looter -
i finally played with it enough to get the file size down to what i want and even found the setting for an elementary stream.....dont know how i missed that before.....dumfukked i guess....last question is........i hope......canopus leaves the files as m2p.......for an svcd i just change this to .mpg.......for a dvd should i change it to vob or mpg before running it through tmpg dvd?
looter
Similar Threads
-
Removing Logos using DeLogo vdub filter
By Matt D in forum EditingReplies: 67Last Post: 6th Apr 2016, 10:26 -
Removing VOBs before burning
By drdumont in forum Authoring (DVD)Replies: 1Last Post: 2nd Apr 2012, 18:29 -
Removing nasty, sticky, slimy DRM from news station videos - how can you?
By GymGirl in forum Newbie / General discussionsReplies: 6Last Post: 23rd Mar 2012, 22:59 -
Requesting for some tv station logos and watermarks
By vhelp in forum EditingReplies: 6Last Post: 7th Jun 2008, 14:30 -
2 Logos on a TV Station
By gll99 in forum Newbie / General discussionsReplies: 10Last Post: 23rd May 2007, 17:18