Greetings ....
Recently bought a Dynex 4-port USB Hub (see attached image) that has an input for power from an AC adaptor. However, no AC adaptor came with the hub. If multiple external hard drives are attached, some do not work because of a lack of adequate power.
On the back of the hub itself, a notation says that input power of 5 volts at 2.0 Amps is recommended.
If there is an AC adaptor with multi-voltage settings, plus interchangable plugs that you know of which will work with this hub, please let me know.
Thanx-A-Lot, Frank-0-Video
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 2 of 2
Thread
-
THE Ultimate TV Tuner Device - Picks up every broadcast-cable-satellite transmission since 1928!
-
Radio Shack usually carries one with multiple voltages and available multiple connectors. Otherwise mail order, but then the connector may be wrong.
They are not really standardized.
RS has less of those type of power supplies than in the past, but you could try one of their stores. And take the hub with you for the proper connector.
Similar Threads
-
Lacie Cinema: Can't power device on using remote but will power on with USB
By truequant in forum Media Center PC / MediaCentersReplies: 1Last Post: 14th Nov 2011, 04:03 -
Easycap USB adaptor and Windows Vista Ultimate - Sound distortion problem
By Eric544 in forum CapturingReplies: 4Last Post: 10th Jun 2011, 16:52 -
AC to USB Power Adaptor
By Frank-0-Video in forum ComputerReplies: 2Last Post: 4th May 2011, 10:49 -
PNG to PDF via Fireworks; best settings? image attached
By sdsumike619 in forum ComputerReplies: 4Last Post: 27th Jan 2010, 05:46 -
power adaptor
By n0p3 in forum Newbie / General discussionsReplies: 1Last Post: 1st Jul 2009, 22:21