I have a JVC HM-DH30000U VCR, and have noticed that on certain tapes the video will play back too "hot". The whites are much too bright, and the captured video cannot be adjusted to look properly with any PC tools.
There seems to be no rhyme or reason as to what tapes playback too hot. All different brands and lengths have this problem, as well as tapes recorded in a variety of different VCRs. It does not do this on any commercially recorded tapes however.
Anyone have any clue as to why this might be?
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 30 of 59
Thread
-
-
Ok, some more information...
* It makes no difference if the VCR is plugged into a wall outlet or a surge protector.
* It makes no difference if the VCR is plugged directly into the TV or not.
* All three options of cable produce the same results.
* The same tape, played in another VCR through the JVC VCR will improve somewhat, but is still too bright. Playing the tape in another VCR hooked directly to the television shows the image properly.
Here's a screencap of one of the tapes in question. Yeah yeah it's wrestling, I know...
-
I believe that's an error of that unit.
I've seen stuff like this on crappy tapes, when using s-video instead of composite.
Don't know enough about your setup to elaborate or guess further.Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
So would it be something fixable? The VCR is still under warranty. Or would it possibly be a problem on all JVC HM-DH30000U units?
Here's the same shot on a $30 VCR playing through the JVC unit.
-
I have no idea.
Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
Originally Posted by filmjax
-
Can you show us the same screen cap directly from one of your vcrs that doesn't have the problem (just for comparison purposes)?
I have noticed that all of my JVC vcrs (I have three) output at least a little bit "hot." This can be corrected fairly well by use of something like a SIMA Color Corrector and playing with the brightness and contrast levels.
If I get some time today, I'll see if a can post some examples. -
Don't know if it's related but I'd read those 3000's had a recall for something. Check JVC support.
My 9911 outputs on the "hot" side too but captures playback fine. My mpegs and dvds show no signs of the "hot" that is present during capture. -
Originally Posted by pfh
-
Originally Posted by Marvingj
My concern is the playback output of the JVC Digital VCR. I would just think that this machine would play a tape better than a $30 Panasonic. It is only certain tapes playing in the JVC machine that have this problem. I run digital cable through it, a DVD player through it and play commercial VHS tapes on it without any trouble. -
Originally Posted by BrainStorm69
-
I'd be interested to know as well. I have some 8mm tapes that show the same thing during playback, as well as some VCR tapes in which certain areas appear as white blotches (as if from overexpsure) through my 9911U.
-
I don't see a problem with the JVC at this point. Both images look like crap, the JVC and the Panasonic.
That's just a horrible tape.Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
Originally Posted by lordsmurf
The JVC unit is too bright and oversaturated. I can live with the image from the Panasonic. The problem here is that I shouldn't have to settle if there's a way to determine the problem with the JVC. -
It seems like you are having a problem with that specific unit. Most people report VHS playback with the JVC 30000 and 40000 D-VHS units is comparable to their 9000 series S-VHS machines (they both are built pretty well and have the 4MB TBC/DNR processing).
I happen to have a used 30000 D-VHS machine on the way, so I'll be sure to report if I see anything like that occuring for VHS playback. -
Originally Posted by gshelley61
-
Hey, I got the JVC 30000 D-VHS unit... not impressed. I guess these machines are only good at playing and recording the D-VHS (MPEG2) high def stuff. It is built well and all, but VHS looked terrible played back on this unit. Lots of digital processing artifacts like color banding, clay faces, smearing, etc. Not a good alternative to a 9000 series JVC S-VHS machine as far as capturing VHS goes.
-
So then the premium for the 9000 series still remains high. Hmmmm.....
Can be good and bad news for the foreseeable future depending on how you look at it.
Good to know- thanks g. -
All the high-end consumer and prosumer S-VHS units from JVC, Sony, Panasonic, etc. are going for a premium on eBay lately. There are many people out there looking to do decent quality VHS to DVD conversion, so these machines are still in demand to some degree.
-
So gshelley- you going to keep playing with improving vhs playback on the 30000 or are you just going to do dvhs conversions on it? Just curious if you were going to keep it and have a use in for it in your setup?
Or- if you think it isn't any of my d*** business !! -
I've got a couple of D-VHS tapes on the way and want to have a look at them on my Samsung DLP... after that, who knows?
I have several JVC S-VHS machines for VHS playback anyway. I'll probably wind up re-selling the 30000. -
Originally Posted by gshelley61
-
I have similar problems with a JVC HR-S9911U I picked up 4 days ago at J&R in Manhattan -- not as "hot" as shown here, but with other glitches as well. This unit has hot whites as well as exagerrated, washed-out highlights on cable reception as well as record and playback. Edges of all objects are visibly soft, with mice teeth (serrated edges), soft-looking text, "frying" edges even on SP, really bad EP playback on both VHS and SVHS (EP often looks like a faded Polaroid print on old EP tapes). Yet my aging Panasonic PV-V9668, which now stops playing on SP after 15 or 20 minutes, runs rings around the JVC on every tape I play.
I'm taking this JVC back to J&R this morning for a refund. Not at all impressed by this thing's performance, especially at the selling price of $370 + tax. If a so-so Panasonic with arthritis can outplay this unit, I'm ready to start looking for a decent $100 Sharp VCR. Is this JVC defective, or just not worth the money? I say it's a defect: out of the box, the text on the setup menu screens displayed sparkles, soft out-of-focus edges letters and multi-color pixelation. If you highlight a menu item, the text gets fractured and discolored. After messing with JVC's filters for 4 days, I've given up on it. Now can't decide whether to exchange for a new box or just get a refund. This is either a defective unit, or the JVC is the most over-rated VCR on the market.
I'll try this upload one more time:
[img]https://www.videohelp.com/forum/images/guides/p1290774/E:\FIRM1\est\WhtFeet2.jpg
[/img]Last edited by sanlyn; 21st Mar 2014 at 20:38.
-
Ok, so much the upload. I'll try that later. Have to catch a train to return this over-hyped JVC.
Last edited by sanlyn; 21st Mar 2014 at 20:38.
-
It's certainly not "overhyped". It sounds like you have one that got damaged between the factory and you.
Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
Thanks for the swift reply, lordsmurf. I must say, I discovered your DVD guide a few months ago and learned a great deal. I was surprised at this JVC, because I see screen captures in this forum that describe a very good VCR. I resepct yours and others opinions about the 9911. Just very disappointed, after spending $18 in train fare between here and Manhattan to get the unit, and another $18 today to return it (shipping is $18 anyway), that this JVC has downghraded workmanship (so what's new about that today?). I suspect it has a sick output module, since the problems exist on tv, record, and playback. Guess I'll make up my mind at the return counter: if J&R will let me return yet a 2nd unit if I'm dissatisfied, I'll get an exchange.
Would hate to lose $370 + tax + train fares if the JVC won't perform. I can get a brand new Sharp VCR 9xx for $86 from 3 sources, so I feel a little trapped.
Now, if someone would just repair my Panasonic PV-9668 or my old Sony SLV-595HF, I'd be more than happy. But no shop will work on them.Last edited by sanlyn; 21st Mar 2014 at 20:39.
-
Originally Posted by sanlyn
Too bad about tha JVC- it is defective cause mine shows no symptoms like you describe. Then again, I purchased a factory refurb. hmmmm.
You should be able to get a replacement. Demand a replacement. That's not too much to ask. -
@sanlyn,
To upload a photo only use the file name: [arl]whtfeet2.jpg[/arl]* then select browse for image or file.
*change the "a" to a "u" -
Mucho thanks for the upload tip, MOVIEGEEK. I searched the FAQs for this info, couldn't find it.
I just made a 10-minute Ep and SP on plain on VHS on the JVC, off my cable tv. Played back poorly on the JVC, much played much better on the Panasonic (thru tv and my Ati card). So it records OK, but the output is messed up. One thing I found out: the JVC is no match for Panasonic on EP record/playback (the Panny makes EP look almost like SP, but with a little tape noise). Looks like I'll use the JVC for SP and the Panny for EP. Pain in the neck.
Trying that upload one more time.
*]whtfeet2.jpg*[/url]Last edited by sanlyn; 21st Mar 2014 at 20:39.
Similar Threads
-
Sharp XA-series "Professional" VCR's ... any good?
By jbd5010 in forum CapturingReplies: 1Last Post: 15th Apr 2023, 20:52 -
Panasonic DVD Recorder-VCR Combo unit model "DMR-ES35V"
By Syd Jamal in forum DVD & Blu-ray RecordersReplies: 4Last Post: 17th Jan 2010, 15:27 -
A "good enough" capture VCR for under $100?
By ministry88 in forum RestorationReplies: 1Last Post: 5th Mar 2009, 23:13 -
DVD Lab Pro - Three elemenetary "hot to ....." questions
By perfection in forum Authoring (DVD)Replies: 2Last Post: 1st Sep 2007, 06:45 -
VCR Overscan Issues ("jittery" line at top of screen)
By jcm0320 in forum CapturingReplies: 14Last Post: 24th Aug 2007, 13:56